Source-based routing on CUBE

[TIMOTHY DAVIDSON]

I'm trying to find a way to route inbound SIP calls, based on their source. For example:

SIPCarrier1 is coming from 1.1.1.1

SIPCarrier2 is coming from 2.2.2.2

If calls originate from SIPCarrier1, I want them to be passed to my UCM Cluster.

If call originate from SIPCarrier2, I want them to be passed to my Asterisk box.

I've played around with incoming called-number, trying to make it work with IP addresses, rather than phone numbers, but no luck.

Any ideas of where to start?

Thanx

[paolo bevilacqua · Accepted solution]

Check Source VoIP Group:

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ftgwrepg.html

[TIMOTHY DAVIDSON]

Perfect! I think this is exactly what I was looking for.

Thank you.

[virverma]

Cisco CallManager uses SIP route patterns to route or block both internal and external calls.

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b03siprp.html

[paolo bevilacqua]

OP is asking about CUBE, not CM.