Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SPA2102 call transfer with CME?

Hi there

I have a CME (Version 7.1, 12.4(24)T6) in my lab and I'm trying to do a call transfer (consult) on an analog phone connected to a SPA2102.

Calling in/out from the analog phone ist working but the flash function (with *98) won't work. I can't hear a second dial-done.

Who can share me a setup with the call transfer functionality?

Thanks,

Norbert

Attached the setp from the SPA2102 (line1)

Here the CME setup (analog phone has nr. 132):

voice register global

mode cme

source-address 192.168.xx.xx port 5060

max-dn 192

max-pool 58

time-format 24

hold-alert

call-forward system redirecting-expanded

!

voice register dn  132

number 132

name number-132

label number-132

!

voice register pool  1

id mac 0000.0000.0000

number 1 dn 132

dtmf-relay rtp-nte cisco-rtp sip-notify

username 132 password xxxxx

codec g711ulaw

no vad

Here the show voice register:

VOICE REGISTER POOL

===================

Pool Tag 1

Config:

  Mac address is 0000.0000.0000

  Number list 1 : DN 132

  Proxy Ip address is 0.0.0.0

  DTMF Relay is enabled, rtp-nte, cisco-rtp, sip-notify

  Call Waiting is enabled

  DnD is disabled

  Busy trigger per button value is 0

  keep-conference is enabled

  username 132 password xxxxx

  Transport type is udp

  service-control mechanism is not supported

  registration Call ID is d670c8a0-9ca0288@192.168.xx.xx

  Privacy feature is not configured.

  Privacy button is disabled

  active primary line is: 132

Dialpeers created:

dial-peer voice 40001 voip

destination-pattern 132

session target ipv4:192.168.xx.xx:5060

session protocol sipv2

dtmf-relay rtp-nte cisco-rtp sip-notify

codec  g711ulaw bytes 160

no vad

  after-hours-exempt   FALSE

Everyone's tags (3)
788
Views
0
Helpful
0
Replies
CreatePlease to create content