Hi Guys, i am trying to register a cisco SP502G on our CUCM 8.6 as a third party sip device with no luck, We could register a polycom soundpoint ip 550, and i'm wondering if this is possible? if so please can you point me to the right direction.
Hi Oscar. You can register both devices as sip third party phone. You have to make sure to create an end user for each device, create a DN and associate an end user to each dn. On client side you have to place the DN number as username and display name and the end user ( created in cucm and associated with the DN specified as username) as authorization username.
Sent from Cisco Technical Support iPhone App
Please rate all helpful posts
"The more you help the more you learn"
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.