Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SPAN/RSPAN on same switch

Hi, i am having an issue where I have destination port for a call recording server, on the same switch as other phones which are being monitored/recorded. Normally this wouldn't be a problem, but we have RSPAN configured as there are 5 other switches with phones on that need to be recorded. So on the switch with the recording server on, we have 2 monitor sessions as detailed below

monitor session 1 source interface Fa0/11 , Fa0/25 - 30 , Fa0/32 - 34 , Fa0/37 , Fa0/41 - 42

monitor session 1 destination remote vlan 300

monitor session 2 destination interface Fa0/3

monitor session 2 source remote vlan 300

Phones on the remote switches are being recorded OK, but the phones on the same switch as the recording server are not being recorded. Is this configuration possible, or does the recording server have to be on it's own switch?

Any help here would be appreciated.

104
Views
0
Helpful
0
Replies