Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Speed Dial / Redial not displaying called number until connected.

Hello,

At the moment when I press redial, or select my speed dial, the phone does not show the number called until it actually connects / the first ring-back tone.

Is there a way to change this behaviour?

Phone: 7960.

CUCME 8.5.

Regards

Felix

3 REPLIES
Cisco Employee

Speed Dial / Redial not displaying called number until connected

Felix,

What is the firmware type ( SCCP or SIP ) & version running in 7960 ?

I'd first try upgrading the firmware & see if it helps fixing such cosmetic issue. Latest firmwares can be downloaded from here ( choose the protocol type SCCP or SIP to proceed further ).

HTH


GP.

Pls rate helpful posts by clicking on stars below the post !!

Blue

Speed Dial / Redial not displaying called number until connected

Hi,

Is it happening to 7960 phones only. Because CME will not display the called number when redialing until the CME sends "alerting" to the calling side. Which means that the other side is ringing which is when users see the redialed number.

What you are seeing it correct way of working.

Regards

Ronak Patel

Please rate helpful posts by clicking on stars below the answer

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

Speed Dial / Redial not displaying called number until connected

Thanks for the replies

@Ronak: I have a feeling that this is expected behaviour as you mention Ronak.

@GP: SCCP 8.0.9. I don't have 7940 to compare, I'll upgrade to 8.1 SCCP to see what happens..

462
Views
0
Helpful
3
Replies
CreatePlease login to create content