cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
342
Views
5
Helpful
2
Replies

Speed dial with CCME

michaelzhq
Level 2
Level 2

Is there any way that users can edit "abbreviation dial" entries or "personal speed dial" entries on the phone by themselves?

CCME 4.0/4.1

IP Phone: 7910, 7940, 7941, 7960, 7970

Thanks

2 Replies 2

Rob Huffman
Hall of Fame
Hall of Fame

Hi Michael,

Changing Existing Speed-Dial Button Information from an IP Phone

Once an administrator has created one or more unlocked speed-dial definitions that appear on buttons on an IP phone,local speed-dial entries on IP phone buttons can be defined without telephone numbers so that phone users can enter whatever numbers they want from the phone. Local speed-dial definitions can also be created with locked numbers that cannot be changed from the phone. Systemwide speed-dial definitions cannot be changed from the phone. A phone user can reprogram the buttons by using the following steps.

SUMMARY STEPS

1. Select an available phone line.

2. Press the pound key (#).

3. Press the speed-dial button that you want to program.

4. Enter the full telephone number to be dialed when the button is pressed.

5. Press the speed-dial button that you are programming a second time.

6. Hang up the receiver or press a new speed-dial button.

DETAILED STEPS

--------------------------------------------------------------------------------

Step 1 Select an available phone line. Lift the handset, press the NewCall soft key, or press a button. Listen for the dial tone. Note that the Newcall soft key must not be disabled for the Cisco IP Phone 7905G and the Cisco IP Phone 7912G.

Step 2 Press the pound key (#).

Step 3 Press the speed-dial button that you want to program. A short beep confirms that you are starting to program this button.

Step 4 Enter the full telephone number to be dialed when the button is pressed. The digits are output to the phone display. When speed-dial numbers are entered on a Cisco IP Phones 7940 and 7940G or Cisco IP Phones 7960 and 7960G, the Backspace soft key (<<) is available to let you correct digits that were typed incorrectly. To remove a speed-dial number without replacing it with a new one, press the pound key (#).

Step 5 Press the speed-dial button that you are programming a second time to indicate that you have finished entering the speed-dial digits and to store the new speed-dial number.

Step 6 Hang up the receiver or press a new speed-dial button, and repeat the process.

From this doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00804ad85d.html#wp2230636

Hope this helps!

Rob

michaelzhq
Level 2
Level 2

Thanks for the reply.

Here I am not talking about the speed-dial button. So I still has the question.

When we use CallManager, users can edit "personal fastdial" in the Personal Directory. I'd like to know if there is the same feature(users can edit speed-dial entries by themselves) when we use CallManager Express.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: