Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Speed dials for Callmanager Express

Hi,

I'm implementing a Callmanager express for a client and i'm experiencing a problem. I configured speed dial on a 7961 IP phone. The speed dial shows agains some of the botton on the phone and does not show on other botton. Despite the same commands for all bottons. What could probably be the cause? Pls help.

4 REPLIES
Hall of Fame Super Gold

Re: Speed dials for Callmanager Express

Hi, speed-dial will show only if you have free unused buttons, and the number used does NOT define the button that will be used, is that your case ?

Re: Speed dials for Callmanager Express

Hi Peternnaji,

How are you programming CME? Through the console or web interface?

Try doing this with the web interface. It's much easier.

HTH, Please vote below for my post.

Regards,

Justin Brenton

New Member

Re: Speed dials for Callmanager Express

I'm programming thriugh console but how do i go into the web interface?

Re: Speed dials for Callmanager Express

Hi friend,

Check this link to enable the GUI for CallManager Express:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmegui.html

Hope this helps a little bit.

Regards,

-- Adrián.

126
Views
0
Helpful
4
Replies
CreatePlease to create content