Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Speed Dials

How do users use the speeds dials they setup through the user web interface?

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Speed Dials

Hi Taylor,

The Speed Dials that are configured by the User via ccmuser are associated with spare Line Buttons (if any are available)and the remainder are accessed via the AbbrDial Softkey (Abbreviated Dial) In this test scenario the 7961 has a Button Template called 3-Line 3-Speeddial so the first 3 that are setup via ccmuser take Line Button 4,5 and 6. The remainder are accessed by keeping the Handset On-Hook, dialing the applicable Speed Dial Code (for example 15 followed by pressing the AbbrDial Softkey) the number programmed against Speed Dial 15 will then be called;

The following options are available for SEP00170EEE2F88 (Test Q335):

Forward all calls to a different number

Add/Update your Speed Dials

Configure your Cisco IP Phone Services

Configure your Cisco Personal Address Book

Change the Message Waiting Lamp policy for your phone

Change the Ring Settings for your phone

Change the Locale for this phone

Change the Locale for these web pages

Change your Password

Change your PIN

Add/Update Your Speed Dials

Configure the Speed Dial Buttons for your Cisco 7961 (SEP00170EEE2F88)

Use this page to enter the phone numbers you want associated with each of your Speed Dial buttons. When you are done, click Update.

Hope this helps!

Rob

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
1 REPLY
Hall of Fame Super Red

Re: Speed Dials

Hi Taylor,

The Speed Dials that are configured by the User via ccmuser are associated with spare Line Buttons (if any are available)and the remainder are accessed via the AbbrDial Softkey (Abbreviated Dial) In this test scenario the 7961 has a Button Template called 3-Line 3-Speeddial so the first 3 that are setup via ccmuser take Line Button 4,5 and 6. The remainder are accessed by keeping the Handset On-Hook, dialing the applicable Speed Dial Code (for example 15 followed by pressing the AbbrDial Softkey) the number programmed against Speed Dial 15 will then be called;

The following options are available for SEP00170EEE2F88 (Test Q335):

Forward all calls to a different number

Add/Update your Speed Dials

Configure your Cisco IP Phone Services

Configure your Cisco Personal Address Book

Change the Message Waiting Lamp policy for your phone

Change the Ring Settings for your phone

Change the Locale for this phone

Change the Locale for these web pages

Change your Password

Change your PIN

Add/Update Your Speed Dials

Configure the Speed Dial Buttons for your Cisco 7961 (SEP00170EEE2F88)

Use this page to enter the phone numbers you want associated with each of your Speed Dial buttons. When you are done, click Update.

Hope this helps!

Rob

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
414
Views
0
Helpful
1
Replies