SR140 SIP trunk

[fdemierre]

Dear all,

I’ve Cisco Fax server with an SR140 and I would to configure 2 SIP trunk, 1 for each CallManager. I would liketo do that for redundancy. I’ve the possibility to add only 1 ip address on the SR140 config panel. Somebody can help me ?

Thanks

[philip.e.denton]

Fabrice, have you seen the attached document?  It's pretty thorough.

[fdemierre]

Thanks Philip, I've already read this document but I've not found any informations to add 2 sip gateway in the sr140