cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
973
Views
0
Helpful
4
Replies

SRST 8.1 Phones not registering

aman.kapuria
Level 4
Level 4

c2900-universalk9-mz.SPA.151-2.T1.bin

CONFIG (Version=8.1)
=====================
Version 8.1

Pure H323 setup. Reference set in call manager. Phones just go in loop saying registering. I can see that default gateway is the router itself in phone. All 7942 phones with firmware sccp 42.8-5-3s

Any ideas/suggestions/bug reports appreciated

4 Replies 4

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

Perhaps start by posting your configuration.

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

call-manager-fallback
secondary-dialtone 0
max-conferences 4 gain -6
transfer-system full-consult
timeouts interdigit 3
ip source-address 192.168.255.25 port 2000
max-ephones 24
max-dn 50 dual-line
system message primary SRST
default-destination 298
voicemail 6148
moh ivision_new.wav
multicast moh x.x.x.x port 16384 route 192.168.255.25 192.168.60.1
time-zone 48
time-format 24
date-format dd-mm-yy

Hi Aman!

  I'm running into this same exact issue, TAC doesn't seem to have an answer for it.  Were you able to determine the issue and did you find a work around?

Thank you...

Hi Mate

As far as i remember, i had a wrong srst reference set in the call manager device pool. was a silly mistake. You might want to post your configuration and check the srst reference.

Cheers

Aman

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: