10-28-2013 03:18 PM - edited 03-16-2019 08:06 PM
When in SRST, inbound calling works fine, outbound also works, but presents the incorrect calling number.
For manipulating the outbound calling number, should I use an translation pattern, such as
voice translation-rule 10
rule 1 /^0\(....\)/ /415232\1/
!
voice translation-profile SRST_OUT
translate calling 10
!
call-manager-fallback
translation-profile outgoing SRST_OUT
Or, a dialplan-pattern statement.
Thanks
Solved! Go to Solution.
10-28-2013 04:20 PM
Use translation profile and apply it to SRST rather than dial-peer or voice-port, i.e.
call-manager-fallback
translation-profile incoming SRST_OUT
you need to use incoming as that is from the phone to SRST.
HTH,
Chris
10-28-2013 04:20 PM
Use translation profile and apply it to SRST rather than dial-peer or voice-port, i.e.
call-manager-fallback
translation-profile incoming SRST_OUT
you need to use incoming as that is from the phone to SRST.
HTH,
Chris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: