I appreciate your help and suggestions on the below.
I have the following:
- CUCM at the HQ-Site
- Cisco 3945 gateway at the main site
- Several remote sites where the IP Phones are registered to the HQ's CUCM. The remote routers are Cisco3945/2811/3825.
The client's request is to only have SRST configured at the HQ's router and to have all the IP Phones of all the remote sites, register at the HQ's site SRST.
Please advise whether it's doable and how.
Solved! Go to Solution.
Correction: The client's request is to only have SRST configured at the HQ's router and to have all the IP Phones of all the remote sites, register at the HQ's site SRST, in case of main CUCM failure (not WAN failure). *
So do you confirm that it's doable?
Apologies as I didn't find a straight clear config in your provided link.
Any special config needed on the remote routers?
They are not voice-enabled routers, do I need to add the "SL-39-UC-K9=" on the remote routers?
you can refer the datasheet of SRST