Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

SRST full E164 with + sign

Hi All,

there is a CUCM 8.5.1 with 6921 (SCCP) and 9971 (SIP) registered.

There is also a remote site with a 2951 (IOS 15.1.3), GW set as SRST reference.

All phones are registered with full E.164 numbers (with + sign at the begining!) on CUCM, and can call each other with the last 3 digits!

In case of WAN failure phones register with the SRST GW with their full E.164 number (with the plus sign). How can I ensure that phones also could call each other with 3 digits in SRST mode??

I have tried num-exp, dialplan pattern without any luck... Perhaps the '+' sign cause this issue?

Thanks for your help!

Regards,

Tibor

1 REPLY
New Member

SRST full E164 with + sign

you can use the translation-profiles in the ephone-dn template , this will solve the issue

num exp command will not work out for "+" sign...

724
Views
0
Helpful
1
Replies
CreatePlease to create content