Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRST incoming call to FXO fails

hi all,

i mu using cisco 2911  as SRST. this VG is connected to the FXO .

i have a problem for the external incoming call  on SRST mode :  the external incoming call ring one time and after that the call is connected , but with silent.

i m using this configuration for the fxo port:

!

voice-port 0/1/1

supervisory disconnect dualtone mid-call

no battery-reversal

no vad

no comfort-noise

timeouts call-disconnect 1

timeouts ringing 5

timeouts wait-release 1

timing hookflash-out 50

connection plar 2002

the 2002 extension is an cisco 8961

Please could someone help

thanks in advance

Everyone's tags (6)
1 REPLY
Green

SRST incoming call to FXO fails

Hi,

Can you provide the full confg from the router.

show run

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
502
Views
0
Helpful
1
Replies
CreatePlease to create content