I am having issues getting SRST to function properly on 2811 configured as H323 gateway. When SRST mode takes over only 4 digits are allowed to be entered and cannot make outgoing calls on POTS lines. Gateway will not except more than 3 digits after 8 (used for secondary dialtone). Below are my dial-peers. Alias are working correctly on incoming calls during SRST. SRST is also configured correctly on CM and phones register as associated to correct SRST profile and device pool.
I will definitely try that. Another question...Below are my voip dial peers. i recently changed the secondary dial out digit from 9 to 8 due to a ton of inadvertant 911 calls. Do i need to change my desitnation patterns on voip int's from [2-8]... to something else to reflect the change form 9 to 8 for outside line?
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.