Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRST License on 2911

Guys,

I purchased a 2911 with SRST and UC licenses. I notice that the UC license is fine - but the SRST license is in 'evalrighttouse' mode. The box came with two white cardboard envelopes - one contained a SRST site license and the other a 25 seat SRST license - but they just had the product code - and no PAK numbers on the paper.

Has anyone installed SRST licenses on a 2911 ?? Do I need to ? Here is the License status at the moment.

Index: 5        Feature: cme-srst                          Version: 1.0

        License Type: EvalRightToUse

        License State: Active, In Use

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 7  weeks 4  days

            Period used: 6  days 20 hours

            Transition date: Nov 22 2013 13:49:51

        License Count: 10/0  (In-use/Violation)

        License Priority: Low

        Store Index: 7

        Store Name: Built-In License Storage

Index: 11       Feature: uck9                              Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

        Store Index: 1

        Store Name: Primary License Storage

Any Help appreciated

James

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: SRST License on 2911

The ISR-G2 comes with a 60-day evaluation license. After 60 days, the license changes to ?right to use?.
The customer is required to pay for the CME-SRST feature license which is valid for 12 years.
Prerequisites
? UCK9 license
? ISR-G2 already accepts UC CLIs

SUMMARY STEPS
1. show license detail cme-srst
2. configure terminal
3. license accept end user agreement
4. exit
5. show license detail cme-srst
6. write mem

DETAILED STEPS
Command or Action Purpose

Step 1 show license detail cme-srst
Example:
Router# show license detail cme-srst
Displays the available cme-srst license. EULA should be in NOT
ACCEPTED state.

Step 2 configure terminal
Example:
Router# configure terminal
Enters global configuration mode.

Step 3 license accept end user agreement
Example:
Router(config)# license accept end user
agreement
Configures a one-time acceptance of the EULA for cme-srst
license.
Accepts EULA by typing YES.

Step 4 exit
Example:
Router(config)# exit
Exits global configuration mode.

Step 5 show license detail cme-srst
Example:
Router# show license detail cme-srs
Displays the available cme-srst license. EULA should be in
ACCEPTED state.

Step 6 write mem
Example:
Router# write mem
Saves configuration.
Command or Action


Sent from Cisco Technical Support iPhone App

Please rate replies and mark question as "answered" if applicable.
VIP Purple

SRST License on 2911

Hi James,

you can refer the link for detail.

https://supportforums.cisco.com/docs/DOC-26706

regds,

aman

4 REPLIES

Re: SRST License on 2911

The ISR-G2 comes with a 60-day evaluation license. After 60 days, the license changes to ?right to use?.
The customer is required to pay for the CME-SRST feature license which is valid for 12 years.
Prerequisites
? UCK9 license
? ISR-G2 already accepts UC CLIs

SUMMARY STEPS
1. show license detail cme-srst
2. configure terminal
3. license accept end user agreement
4. exit
5. show license detail cme-srst
6. write mem

DETAILED STEPS
Command or Action Purpose

Step 1 show license detail cme-srst
Example:
Router# show license detail cme-srst
Displays the available cme-srst license. EULA should be in NOT
ACCEPTED state.

Step 2 configure terminal
Example:
Router# configure terminal
Enters global configuration mode.

Step 3 license accept end user agreement
Example:
Router(config)# license accept end user
agreement
Configures a one-time acceptance of the EULA for cme-srst
license.
Accepts EULA by typing YES.

Step 4 exit
Example:
Router(config)# exit
Exits global configuration mode.

Step 5 show license detail cme-srst
Example:
Router# show license detail cme-srs
Displays the available cme-srst license. EULA should be in
ACCEPTED state.

Step 6 write mem
Example:
Router# write mem
Saves configuration.
Command or Action


Sent from Cisco Technical Support iPhone App

Please rate replies and mark question as "answered" if applicable.
New Member

SRST License on 2911

I believe I have already completed these steps

license accept end user agreement

license boot module c2900 technology-package uck9

and I also see

license accept end user agreement

on my configuration.

But I notice you say  -

comes with a 60-day evaluation license. After 60 days, the license changes to ?right to use?.

So I take it I dont have anything to worry about we have paid for a 25 seat license. I was worried that after the 60 days the license would appear as 'violated' but from what you are saying - I take it -   this is not the case.

Thanks for your help

James

VIP Purple

SRST License on 2911

Hi James,

U can refer the link on Paul discussion.

https://supportforums.cisco.com/thread/2075698

regds,

aman

VIP Purple

SRST License on 2911

Hi James,

you can refer the link for detail.

https://supportforums.cisco.com/docs/DOC-26706

regds,

aman

216
Views
5
Helpful
4
Replies
CreatePlease to create content