08-05-2008 12:21 PM - edited 03-15-2019 12:26 PM
Hi
If you have a router that supports 100 ip phones in SRST mode but have 120 phones, is there a way of deciding which phones will not register?
regards
colin
Solved! Go to Solution.
08-05-2008 01:25 PM
Create two device pools on CCM/CUCM and assign one of the device pools with the appropriate SRST reference and leave the other one set to default. From there you are able to create your Cor list's as needed on your SRST device and know that the appropriate devices are able to register.
08-05-2008 12:27 PM
You can use max-phones
or ACLs to restrict specific IP/subnets or not add the SRST reference for the Phones u dont want to register in SRST mode
08-05-2008 01:25 PM
Create two device pools on CCM/CUCM and assign one of the device pools with the appropriate SRST reference and leave the other one set to default. From there you are able to create your Cor list's as needed on your SRST device and know that the appropriate devices are able to register.
06-17-2010 06:18 AM
Hi,
can this be acheived by manually entering the ephone-dn is the vg ?So at the time the fall back happns only these dn get registered....
Faizal
06-17-2010 02:31 PM
Yes - that would work.
Regards
Aaron
08-05-2008 01:57 PM
thank you both for your reply
regards
colin
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: