05-10-2007 08:25 AM - edited 03-14-2019 09:25 PM
Hi
When in SRST mode, is it possible to define witch phones do register with the SRST gateway? For example I have 60 phones in the same region, as define in the CallManager (4.2), but the license for the SRST is only to 48 phones, and I would like to be able to define witch phones continue to work until the WAN link is re-establish. Is this possible and how?
Thanks
Solved! Go to Solution.
05-10-2007 08:27 AM
Yes, Simply create two device pools and one SRST reference for this remote site. Assign DP1 to SRSTREF1 and DP2 - set the SRST reference to disable.
Assign the phones that require SRST to DP1 and Assign the phones that do not require SRST to DP2.
HTH
Sankar
PS: please remember to rate posts!
05-10-2007 08:27 AM
Yes, Simply create two device pools and one SRST reference for this remote site. Assign DP1 to SRSTREF1 and DP2 - set the SRST reference to disable.
Assign the phones that require SRST to DP1 and Assign the phones that do not require SRST to DP2.
HTH
Sankar
PS: please remember to rate posts!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: