Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRST - Registration issue

Hi,

i have a 2811 router on a remote site. when i disconnect the link between remote site and hq the phones have to switch into fallback mode. in ucm, all is configured correctly. when i check registration on the gateway with "show ephone" - no phone is registered. I'm running IOS 12.4(13r)T. And here is my config:

At remote-site i have 7941/7961/7911

CONFIG (Version=4.0(0))

=====================

Version 4.0(0)

For on-line documentation please see:

<A HREF="javascript:newWin('http://www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm')">www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm</A>

ip source-address x.x.x.x port 2000

max-ephones 35

max-dn 35

max-conferences 4 gain -6

dspfarm units 0

dspfarm transcode sessions 0

huntstop

dialplan-pattern 1 xxxxxx... extension-length 3

dialplan-pattern 2 xxxxxx..... extension-length 5

cnf-file location: system:

cnf-file option: PER-PHONE-TYPE

network-locale[0] US (This is the default network locale for this box)

network-locale[1] US

network-locale[2] US

network-locale[3] US

network-locale[4] US

user-locale[0] DE (This is the default user locale for this box)

user-locale[1] US

user-locale[2] US

user-locale[3] US

user-locale[4] US

srst mode auto-provision is OFF

srst ephone template is 0

srst dn template is 0

srst dn line mode is single

time-format 24

date-format dd-mm-yy

timezone 0 Greenwich Standard Time

secondary-dialtone 0

no call-forward pattern is configured.

no transfer-pattern is configured, transfer is restricted to local SCCP phones only.

alias 1 xxxxxx to xxxx

alias 2 xxxxx... to xxxx

alias 3 xxxxxxx..... to xxxxx

keepalive 30

timeout interdigit 10

timeout busy 10

timeout ringing 180

timeout ringin-callerid 8

caller-id name-only: enable

system message primary Notbetrieb

Limit number of DNs per phone:

7910: 36

7935: 36

7936: 36

7940: 36

7960: 36

7970: 36

Log (table parameters):

max-size: 150

retain-timer: 15

transfer-system full-consult

local directory service: enabled.

168
Views
0
Helpful
0
Replies
CreatePlease login to create content