Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SRST registration time

Hi,

When I put down the WAN link, ip phones take some time to register in SRST router.. can I change this time ? They're taking over a minute to register.. and I'd like they start registering after 15 sec.

Thanks.

Andrei.

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: SRST registration time

Hi, the Ip phones send keepalives every 30 sec by default, after 3 loss keepalives, the phones tries to register with its SRST. You can reduce the keepalives time to every 10 seconds as a min value in Serice Parameter->CCM->(search keepalive option).

Hope this help

David

2 REPLIES
Bronze

Re: SRST registration time

Hi, the Ip phones send keepalives every 30 sec by default, after 3 loss keepalives, the phones tries to register with its SRST. You can reduce the keepalives time to every 10 seconds as a min value in Serice Parameter->CCM->(search keepalive option).

Hope this help

David

New Member

Re: SRST registration time

Hi !

I changed the "Station KeepAlive Interval" from 30 to 15 and it's better now.

Thanks a lot !

Andrei.

312
Views
0
Helpful
2
Replies