Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

srst secondary-dialtone does not support dialing via # ??

The Company I am working with uses # for outside calls (as opposed to say a 9) with CUCM.  The problem is that when a remote site goes into SRST, the newer routers running Fallback 8.1 do not support the # even where the dial-patterns are already configured to do so and otherwise work properly under H.323.  Older routers do support the #.  Using a # for secondary-dialtone is also not supported which makes me think Cisco dropped support for the #.

Does anyone now if Cisco actually discontinued support of the # key for "outside" dialing or am I missing something here.

Everyone's tags (4)
2 REPLIES
Cisco Employee

srst secondary-dialtone does not support dialing via # ??

Roger,

SRST 8.1 should be IOS 15.

There is a known issue for secondary-dialtone command while using any caracter not being 0-9.

You might want to look at this.

CSCtn51761

Please rate this post if it was helpful.

Thanks,

Luis Ramirez

New Member

srst secondary-dialtone does not support dialing via # ??

excellent, that is what I suspected!

Thanks

Roger

332
Views
5
Helpful
2
Replies