Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRST Times

Hi

The phones unregistered in SRST when the wan link go up the register in CCM is very fast. But the phone registered in SRST when the wan link go up the register in CCM is 60-80 seconds. Are there any way of customize it?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: SRST Times

This works as designed, the phones has to loose 3 keepalives in order to fail into SRST, the default keepalive is 30 seconds, so depending where the phone is in the cycle this could take anything from 61 to 90 seconds. You can change the "Station KeepAlive Interval " CM Service parameter from default 30 seconds to 10 seconds, but that will increament SCCP traffic between the phones and CM servers.

HTH, please rate all helpful posts!

Chris

1 REPLY
Hall of Fame Super Silver

Re: SRST Times

This works as designed, the phones has to loose 3 keepalives in order to fail into SRST, the default keepalive is 30 seconds, so depending where the phone is in the cycle this could take anything from 61 to 90 seconds. You can change the "Station KeepAlive Interval " CM Service parameter from default 30 seconds to 10 seconds, but that will increament SCCP traffic between the phones and CM servers.

HTH, please rate all helpful posts!

Chris

123
Views
0
Helpful
1
Replies
CreatePlease login to create content