Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.


SRST transfer question

Below is an extract form our SRST config.

All DN`s are 719xxxx but in realliyu user only dial the last 4 digits

It seems that since I have translations under the fallback, I could not transfer call in SRST unless I entered the DN prefix of 7.... I thought all IP to IP transfer calls are allowed and you only have to hav eteh transfer-pattern commend for IP to non - IP calsl i.e PSTN, Telco- It seems to be due to the Translation rules- Is this normal.

voice translation-rule 1

rule 1 /^7\(...\)/ /7197\1/

voice translation-rule 2

rule 1 /^719\(....\)/ /\1/

voice translation-profile ADD719

translate called 1

voice translation-profile REMOVE719

translate calling 2



service alternate Default

ccm-manager fallback-mgcp

ccm-manager redundant-host x.x.x.x

ccm-manager mgcp

no ccm-manager fax protocol cisco

ccm-manager music-on-hold

ccm-manager config server x.x.x.x

ccm-manager config


mgcp call-agent x.x.x.x 2427 service-type mgcp version 0.1

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

mgcp package-capability sst-package

mgcp package-capability pre-package

no mgcp package-capability res-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp rtp payload-type g726r16 static

mgcp bind control source-interface GigabitEthernet0/0

mgcp bind media source-interface GigabitEthernet0/0

mgcp profile default

sccp local GigabitEthernet0/0

sccp ccm x.x.x.x identifier 1

sccp ccm x.x.x.x. identifier 2

sccp ccm x.x.x.x identifier 3

sccp ccm x.x.x.x identifier 4


sccp ccm group 1

bind interface GigabitEthernet0/0

associate ccm 1 priority 1

associate ccm 2 priority 2

associate ccm 3 priority 3

associate profile 1 register CFB_xxxx

switchback method graceful

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 8

associate application SCCP


max-conferences 12 gain -6

transfer-system full-consult

limit-dn 7935 1

limit-dn 7940 6

limit-dn 7960 6

timeouts interdigit 4

ip source-address x.x.x.x port 2000

max-ephones 350

max-dn 300 dual-line

transfer-pattern 9.T

transfer-pattern .T

transfer-pattern 7...

translation-profile incoming ADD719

translation-profile outgoing REMOVE719

time-format 24

date-format dd-mm-yy

many thanks


Re: SRST transfer question