It's not my idea, and I can't change this business model, but...
We have a single branch office that will soon be shared between 2 different holdings of ours. We have a single PRI with an H.323 gateway registered to 2 different CCM clusters.
I'm concerned about how we're going to maintain voicemail functionality in SRST fallback. 1 group of users is using CUE while the other is using Unity.
I'm wondering if I can do something clever with COR lists -- specifying DID ranges under SRST via cor outgoing statements, then have 2 preferenced outbound dial-peers - 1 for Unity and 1 for CUE. Then within the 2 outbound dial-peers (both with the SRST voicemail # as the destination-pattern), I can do some digit manipulation to adjust the voicemail # to either CUE or Unity. I'm not 100% sure if a call hits a dial-peer with a cor list applied and access is restricted...does the call hunt to the next preferenced dial-peer with the same destination-pattern.
I'm not sure how much sense that makes, but if any other information is needed just ask. Also, if anyone can see other potential gotchas/issues besides SRST vm, please mention that also.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...