Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SRST with fractional ISDN CUCMBE 6

Hi,

I am carrying out an install with CallManager 6 Business edition and run into a hurdle.

As the customer only has 15 Channels on the ISDN30 E1, I have shut down the channels using the maintenance option in the advance tab of the system parameters; this works fine when the gateway is in MGCP mode. The problem I have is when the gateway falls into SRST mode, as it attempts to put the outbound call out on channel 30 and therefore the call fails. Does anyone know of a fix for this.

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: SRST with fractional ISDN CUCMBE 6

Use under the ISDN interface the

"isdn b-channel ascending" command

2 REPLIES
Bronze

Re: SRST with fractional ISDN CUCMBE 6

MGCP fractional T1 is not fully support in Cisco callmanager , better try changing to H.323 gateway for fractional T1.

Green

Re: SRST with fractional ISDN CUCMBE 6

Use under the ISDN interface the

"isdn b-channel ascending" command

312
Views
0
Helpful
2
Replies
CreatePlease to create content