cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
813
Views
0
Helpful
2
Replies

srst with sccp phones wont pass dtmf

Greetings all,

So I have 2 locations, one boston, one london.  Boston has 1 pub,2 subs for cucm as wel as 2 UC.  London has one UC.  All phones register back to boston.  The trunk to the london UC is sip.  when we ran a SRST test, we could make outbound calls, inbound calls and inter office 4 digit calls. (SRST was working).  When we tried to call the Unity Connection system, the UC answered but was tone deaf.  it heard no DTMF. 

All phones are SCCP

CUCM --> UC trunk is sip.

What needs to change in the vgw to have this work correctly. 

voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
no supplementary-service h450.7
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
fax protocol pass-through g711ulaw
h323
no h225 timeout keepalive
h225 timeout ntf 100
h225 display-ie ccm-compatible
call preserve
!
voice class codec 99
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
!
voice class h323 99
h225 timeout tcp establish 3
h225 timeout setup 5
h225 display-ie ccm-compatible
!
!
voice class cause-code 1
no-channel
!
voice moh-group 1
moh WelcomeHome.au
multicast moh 239.1.1.1 port 2000 route 10.10.66.250
!

sccp ccm group 1
associate ccm 3 priority 1
associate ccm 2 priority 2
associate ccm 1 priority 3
associate profile 1 register CFBLondon
associate profile 2 register TXDLondon
associate profile 3 register MTPLondon
switchover method immediate
switchback method graceful
!
dspfarm profile 2 transcode
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 5
associate application SCCP
!
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 5
associate application SCCP
!
dspfarm profile 3 mtp
codec g711ulaw
maximum sessions hardware 5
associate application SCCP

!
dial-peer voice 8930 voip
description *** Voicemail Pilot Unity Connection ***
preference 2
destination-pattern 8930
session protocol sipv2
session target ipv4:10.10.66.203
dtmf-relay sip-notify
codec g711ulaw
no vad

call-manager-fallback
secondary-dialtone 9
max-conferences 8 gain -6
transfer-system full-consult
timeouts interdigit 7
ip source-address 10.10.66.250 port 2000
max-ephones 100
max-dn 100 dual-line
default-destination 1701
voicemail 8930
call-forward busy 8930
call-forward noan 8930 timeout 16
moh WelcomeHome.au
multicast moh 239.1.1.1 port 16384 route 10.10.66.10

thanks in advance

2 Replies 2

Jorge Armijo
Level 4
Level 4

Setting Up a Cisco Unified CallManager Express SIP Trunk Integration with Cisco Unity Connectio:

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/integration/cucme_sip/guide/cucintcucmesip030.html

HTH

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.

Rejohn Cuares
Level 4
Level 4

Set your DTMF to RTP-NTE.

Please rate replies and mark question as "answered" if applicable.

Please rate replies and mark question as "answered" if applicable.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: