Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRST

I have SRST router , i need once incoming calls reach to FXO ports , ring group of extension at same time , it is like hunt group in call manager but i need the steps in SRST router configuration

thanks

1 REPLY
Bronze

Re: SRST

This is one way I have done it but there are others. On the users phone I configured a second line (5555). When SRST had kicked in a call coming into a specific number was sent to the number 5555 and all users with that number on there phone heard the ringing.

Basically each line was a call queue for IPCC Express, but if the Callmanager failed you would lose IPCC as well so this was the option that suited the customer best

SRST config

call-manager-fallback

max-conferences 8 gain -6

ip source-address 10.X.X.X port 2000

max-ephones 42

max-dn 144 dual-line

keepalive 10

no huntstop

alias 1 5920 to 5555 huntstop

alias 2 5921 to 5555 huntstop

alias 3 5922 to 5555 huntstop

time-format 24

date-format dd-mm-yy

Obviously your dial peers will decide how the call is routed to the FXO port

Hope this helps

Paul

116
Views
0
Helpful
1
Replies