Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRST

Hello

I am a network engineer implementing voice.I am implementing a voice solution for one of my client deploying a centalized call processing using call manager 6.1 and cisco 3845 as the voice gateway.

At the remote sites, they dont have an SRST router what they have a normal router. the client said they do not want call processing at the remote sites when the WAN link goes down to justify why they do not need SRST router.

How will i implement the call processing to the remote sites without an srst router

3 REPLIES
VIP Super Bronze

Re: SRST

Hi,

Your best bet is to read the SRND guide..here

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/uc6_1.html

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Re: SRST

Sebastine,

If you need to use the centralized call processing model with Cisco Callmanager, you also need the SRST router into the branch offices.

See below at SRND guide:

Cisco Unified Communications SRND Based on Cisco Unified Communications Manager 6.x - Unified Communications Deployment Models [Cisco Unified Communications Manager (CallManager)] - Cisco Systems - Multisite WAN with Centralized Call Processing:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/models.html#wp1043616

When WAN goes down, phones register with the SRST and now and the calls goes to the PSTN

If you don't need SRST you also can deploy Cisco CallManager Express at each branch office, but there's call handling at each branch office.

Cisco Unified CallManager Express Solution Reference Network Design Guide - Cisco Systems:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/cmesrnd.html

Hope this helps,

Vitor

Re: SRST

if they do not want SRST (which is not best practice) u can configure their router etheir as H323 gateway(with h323 u need to configure dial-peers) or mgcp gateway (registered with ur CCM)

and make dhcp on the router for the voice network and make the ip address on the dhcp option 150 the ip address of your callmanager

if helpfull rate

281
Views
0
Helpful
3
Replies