Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRTP across ICT

Version 7.0.1

Do I need to do anything besides having phones in both clusters encrypted?

1 REPLY
Hall of Fame Super Red

Re: SRTP across ICT

Hi Michael,

Here is some related info;

Configuring the SRTP Allowed Check Box

The SRTP Allowed check box displays in the following configuration windows in Cisco Unified Communications Manager Administration:

•H.323 Gateway Configuration window

•H.225 Trunk (Gatekeeper Controlled) Configuration window

•Inter-Cluster Trunk (Gatekeeper Controlled) Configuration window

•Inter-Cluster Trunk (Non-Gatekeeper Controlled) Configuration window

•SIP Trunk Configuration window

To configure the SRTP Allowed check box for H.323 gateways and gatekeeper or non-gatekeeper controlled H.323/H.245/H.225 trunks or SIP trunks, perform the following procedure:

Procedure

--------------------------------------------------------------------------------

Step 1 Find the gateway or trunk, as described in the Cisco Unified Communications Manager Administration Guide.

Step 2 After you open the configuration window for the gateway/trunk, check the SRTP Allowed check box.

Step 3 Click Save.

Step 4 To reset the device, click Reset.

Step 5 Verify that you configured IPSec correctly for H323. (For SIP, make sure you configured TLS correctly.)

Cisco Unified Communications Manager Security Guide, Release 7.0(1)

Configuring Encryption for Gateways and Trunks

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/7_0_1/secugd/secumgcp.html#wp1055164

Hope this helps!

Rob

168
Views
0
Helpful
1
Replies
CreatePlease login to create content