Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Stopping Music On Hold

As a default, we turned on MOH for the entire clusterwide (CCM 4.0).

We want to disable this functionality and utilize it as necessary on per phone.

What would be the required steps to make this change?

Thanks for the assistance.

4 REPLIES

Re: Stopping Music On Hold

You probably have MOH defined at the device pool level...unassign from your device pools, and just assign to the phones or DN's as needed.

Hope that helped.

New Member

Re: Stopping Music On Hold

No.

"Media Resource Group List" and "User Hold MOH Audio Source" is selected as "none" in device pools.

Re: Stopping Music On Hold

Sounds like you have moh on device pool level and all your phones are in the same device pool, take MoH out of the MRGL on the device pool, place it in a custom MRGL and assign this manually to each phone, also make sure you other resources you need are in this MRGL as well.

HTH, please rate helpful posts

Chad

Re: Stopping Music On Hold

Is you MoH Server in the default MRG? This group will get searched regardless of what MRGL is selected.

HTH, please rate helpful posts

Chad

119
Views
0
Helpful
4
Replies