I recently converted my H323 gateway to SIP trunk. The PSTN is till on PRIs. Since then, I have some very strange issues.
For certain conference bridge numbers, it will not provide the regular prompt for conference code, etc, instead it just rings and rings for 6 - 8 times, and gave out differerent messages.
I did trace on CUCM7 and debug on router, and then had a case open with TAC, the engineer could not find anything wrong.
I suspect that somehow certian SIP information is leaked through PRI, and the called party most likely have SIP trunk as well. Is there anyway to filter the SIP info from leaking through PRI? I also noticed when I dial certain number, and  or other random charactors might show up at TO: field.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...