Strange issue with some extensions and a parallel hunt group.
I am also having issues with the same Cisco 2821 CME system. Some extensions are unable to get audio from calls coming off of a parallel hunt group. This started with extension 1100 and 1101, but now 1102 is also affected. I have been able to work around the issue by assigning that user/phone a higher extension number, but I need to get to the bottom of this issue. All of the phones are SCCP 7940's.
Attached is a sanitized copy of my config. Any help in troubleshooting this would be GREATLY appreciated.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...