All IP telephones are registered with Publisher and only two telephones are registered with Subscriber.
The two telephones which are registered with Subscriber got a very strange issue. When I try to retrieve a telephone number from Directory, it takes ages to show up. It's very very slow. I did the following steps but it didn't help:
1) Reset the phones
2) Delete the phones and inserted once again
3) Checked the switch ports on which the phones are connected
4) Restarted Cisco Tomact service
I hope someone can help me to reslove this issue. How I can force these two telephones to register with Publisher.
Where the phones register and the directory lookup are two independent pieces.
For phone registration, verify that the device pool's that the two phones registering to the PUB contain the SUB as the primary. If they do, and it's still not working, try restarting the tftp server on the PUB, and then restart the two phones.
For the slow directory, have you defined the ip address under service parameters, or is it the hostname? Perhaps the phones are having to resolve the name of the callmanager to do a directory lookup rather than just going to the IP address?
Good starting place noted above. Also, could you tell us what model phones are registered to the subscriber? Are they different (potentially) than other model phones in the cluster? The reason for my question is because some older phones (specifically Polycom phones) support the corporate directory functionality but they parsed the XML data differently than the typical Cisco IP phones. You should also compare firmware versions on those phones vs. the device defaults.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4