Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Subscriber installation fail with Call Manager 8.0.3

I am trying to install Call Manager subscriber

8.0.3 on Cisco MCS 7835 I3 server but it keep on failing with critical error

execution of script

"/usr/local/bin/base_scripts/sd_ifconfig -eth0 -ethtool "autoneg on" ... failed with return code 256

Check licensing

Check connectivity

I tested with hard code the speed and duplex

3 REPLIES
Cisco Employee

Re: Subscriber installation fail with Call Manager 8.0.3

Hi,

The error is indicating an issue with the NIC, check the following

1) Did BIOS recognize the NIC card ? erify the LED on the NIC and what are you seeing

2) Is your switch mode configured as access (switchport mode access )

3) If the speed and duplex are hard coded on the switch they must match with the server.

Thanks,

Lakshmi

VIP Purple

Hi, In addition to what

Hi,

 

In addition to what Laskhmi has said, do you have Node license for this subscriber installed in PUB , if I go with "Check Licensing" message.

 

regds,

aman

New Member

Hi,       I'm getting the

Hi,

 

      I'm getting the same error when tryint to install 8.0.3 onto a version 10.5 .ova.  Where you ever able to figure this problem out?

 

Thank you..

1842
Views
0
Helpful
3
Replies