I have installed a second server of Call Manager (Subscriber), and in the Cisco Unified Communications Manager Group, this second server is not showed, the installation was performed as follows: I installed the second server, as a non first node. The data base was replicated correctly, from the publisher to subscriber. I upload the license file to node Publisher.
But in the "Cisco Unified Communications Manager group members, I do not see the new server.
I restart the Call Manager service and the Cisco License Manager
To add a new node to an existing cluster, follow the steps in Table 1.
Table 6 Adding a New Node to an Existing Cluster
For More Information
Before you make any changes to your existing cluster, be sure that you have a current backup file.
For more information, refer to the Disaster Recovery System Administration Guide.
Perform all pre-installation tasks that apply to your site.
For a list of pre-installation tasks, see Table 1.
Ensure that you have the appropriate number of licenses to support adding a new node.
For more information on specifying the required number of licenses, refer to the License Unit Calculator chapter in the Cisco Unified Communications Manager Administration Guide.
Before you install the new node, ensure that you have configured it on the first node.
From Cisco Unified Communications Manager Administration on the first node, choose System > Server and configure the IP address for the subsequent nodes. For more information, see the Cisco Unified Communications Manager Administration Guide.
Record the configuration settings for each server that you plan to install.
To record your configuration settings, see Table 10.
You must install the same software version on all nodes in the cluster. If you do not have the correct version on DVD, you need to either download updated software from Cisco.com or follow the procedure for applying a patch during the installation procedure.
If your cluster is running in mixed mode, ensure that you have your USB key and the latest security plug-in installed on the PC that you use to communicate with the first node. After you finish installing the new node, you will need to update the CTL file on all nodes.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...