Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

support for ip phone 7942

Hi friends,

I have a cluster of 2 Cisco CallManager (4.1.3 SR1, OS image 2000.4.3a) and like to configure a Cisco IP 7942. I don't have in my device list this model. So, the first step is to find out a device-pack to install. I was wondering if this device pack (Cisco Unified CallManager Device Package 4.1(65.0)), that I guess is the first one that starts supporting 7942, works fine for my cluster, and if somebody already used it successfully.

Some advices?

Regards,

-- adrián.

4 REPLIES
Cisco Employee

Re: support for ip phone 7942

Product Compatibility - General

Q. What Cisco Unified Communications Manager release is required for the Cisco Unified IP Phone 7962G and 7942G models?

A. The Cisco Unified IP Phone 7962G and 7942G models require one of the following releases at minimum: Cisco Unified Communications Manager 4.1(3)sr5b, 4.2(3)sr2b, 4.3(1), 5.1(1)b, 5.1(2), or 6.0(1).

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps8536/prod_qas0900aecd80699c20.html

install the required release and the latest devpack and you should be fine

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: support for ip phone 7942

Hi friend,

Thanks for your reply. I have a question: do i have to upgrade necessarily to 4.1(3)sr5b?

I saw in the release notes for Device Package 4.1(65.0) that is compatible with 4.1(3)sr1.

Take a look to Compatibility Matrix and Supported Upgrades in this doc:

http://download-sj.cisco.com/cisco/crypto/3DES/voice/callmgr/4.1/ciscocm.4-1-DevPack-65.readme.htm

Advice me what should I do, please.

Regards,

-- adrián.

Cisco Employee

Re: support for ip phone 7942

the devpack is indeed compatible with SR1, but you need the combination of a minimum SR and a minimum devpack for the phone support.

in this case the minimum SR is SR5b

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: support for ip phone 7942

Hi friend,

I saw that CCM4.1(3) Service Release 6 have firmware support for 7942/7962 and it does not require an installation of a DevicePack.

Do you think its better to apply this configuration instead of SR5b + DevicePack.

Regards,

-- adrián.

445
Views
0
Helpful
4
Replies