08-31-2010 04:02 PM - edited 03-16-2019 12:33 AM
I tried to swap two phones (using a dummy MAC in the process), but I'm running into the following error. I've tried tracking down the device in question but with no luck. I'm using Cisco Call Manager 4.1(3)
"The MAC address you entered is already assigned to the following device(s):
3133_SEP001818FD515CC
Please check the MAC address for each device and make sure it is correct."
Solved! Go to Solution.
09-01-2010 01:32 AM
Hi
That device name looks like a UDP - if you convert phones to UDPs, they get the username_phonename format. I'm guessing 3133 is a user that had SEP001818FD515CC associated.
At any rate, check under Device/Device Settings/Device Profile, I guess that UDP must refer to one of the phones you are renaming in some way?
Aaron
Please rate helpful posts...
09-01-2010 01:32 AM
Hi
That device name looks like a UDP - if you convert phones to UDPs, they get the username_phonename format. I'm guessing 3133 is a user that had SEP001818FD515CC associated.
At any rate, check under Device/Device Settings/Device Profile, I guess that UDP must refer to one of the phones you are renaming in some way?
Aaron
Please rate helpful posts...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: