Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Switch port setting for Call Manager

Hi,

Just wanted to run a quick check with you guys. I appreciate the help. I have data on vlan 10 and voice on vlan 20. For the switch port that CCM connects to, would I assign it as an access switchport, but in the voice vlan?

interface FastEthernet0/20

description ***Call Manager Server***

switchport access vlan 20

My other ports have an IP phone with a pc connecting to the back of the phone:

interface FastEthernet0/0

description ***Phone+PC***

switchport mode access

switchport access vlan 10

switchport voice vlan 20

spanning-tree portfast

Thank you in advance for the help.

Tom

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Switch port setting for Call Manager

Hi Tom,

You are right on the money! We are using the same "best practice" config here.

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: Switch port setting for Call Manager

Hi Tom,

You are right on the money! We are using the same "best practice" config here.

Hope this helps!

Rob

New Member

Re: Switch port setting for Call Manager

on your FA 0/20 I would add this qos command.

mls qos trust dscp

240
Views
0
Helpful
2
Replies