Hello everyone,
I am trying to implement the Switchboard function that would work during SRST mode.
The configuration/requirement in moment (when CUCM is operating/reachable) :
External callers dial on the main number or main number + 0.
The Called Party Number is then translated to 111 (on the gateway), which is a Hunt Pilot in CUCM.
In SRST mode, the Hunt Pilot is not reachable and the main number or the main number + 0 or the 111 has to be translated to a DN which is configured on a Cisco 9971 Phone.
In our environment we have SCCP and SIP Phones. The forwarding is working with call-manager-fallback for the SCCP Phones (with alias). It is also working when using cme-srst (telephony service) for SCCP Phones, but we were never able to forward the call to the Switchboard phone (Cisco 9971).
The Cisco 9971 registers on the gateway in SRST and it can be reached when we dial the full number (main number + DN of the 9971). We tried to do a translation from 111 to the DN with alias in the voice register pool, but that did not work.
In our test lab, we have both SCCP and SIP phones, but it should work in an environment with only SIP Phones.
Here is the configuration of the gateway :
router01.cucm.lab#sh run
Building configuration...
Current configuration : 7496 bytes
!
! Last configuration change at 11:04:32 UTC Thu Jun 5 2014
! NVRAM config last updated at 13:48:09 UTC Tue Jun 3 2014
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname router01.cucm.lab
!
boot-start-marker
boot-end-marker
!
!
logging buffered 10000
enable password cisco
!
aaa new-model
!
!
!
!
!
!
!
aaa session-id common
network-clock-participate wic 0
!
no ipv6 cef
ip source-route
ip cef
!
!
!
ip dhcp excluded-address 192.168.2.0 192.168.2.10
ip dhcp excluded-address 192.168.2.200 192.168.2.255
!
ip dhcp pool voip
!
!
no ip domain lookup
ip domain name cucm.lab
ip name-server 192.168.2.3
multilink bundle-name authenticated
!
!
!
!
isdn switch-type basic-net3
!
crypto pki token default removal timeout 0
!
crypto pki trustpoint TP-self-signed-432774010
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-432774010
revocation-check none
!
!
voice-card 0
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h225-notify cid-update
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
modem passthrough nse codec g711ulaw
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 600 min 60
!
voice class codec 10
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
!
voice class h323 1
h225 timeout tcp establish 3
!
!
voice register global
max-dn 10
max-pool 1
!
voice register pool 1
translation-profile outgoing outgoingcallSRST
id network 192.168.2.0 mask 255.255.255.0
preference 1
proxy 192.168.2.253 preference 1
dtmf-relay sip-notify
voice-class codec 10
!
!
!
voice translation-rule 10
rule 1 /^$\(.*\)/ /111/
rule 2 /^0/ /111/
!
voice translation-rule 41
rule 1 /111/ /104/
!
!
voice translation-profile incomingcall
translate called 10
!
voice translation-profile outgoingcallSRST
translate called 41
!
!
license udi pid CISCO2911/K9 sn FCZ153820CM
license accept end user agreement
hw-module pvdm 0/0
!
!
!
archive
log config
hidekeys
username cisco privilege 15 secret 5 $1$qzcD$xhvbO9lcVgSW.CMSGdRwz0
username V62 password 0 12345
!
redundancy
!
!
ip ssh time-out 60
ip ssh authentication-retries 2
!
!
!
!
interface GigabitEthernet0/0
ip address 192.168.2.253 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/1.2
encapsulation dot1Q 2
ip address 157.177.2.254 255.255.254.0
!
interface GigabitEthernet0/1.32
description ### fuer ntp server ###
encapsulation dot1Q 32
ip address 157.177.32.20 255.255.254.0
!
interface GigabitEthernet0/1.202
encapsulation dot1Q 202
ip address 157.177.203.254 255.255.254.0
!
interface GigabitEthernet0/1.208
description ### fuer ntp server ###
encapsulation dot1Q 208
ip address 157.177.208.20 255.255.254.0
!
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/0/0
no ip address
isdn switch-type basic-net3
isdn overlap-receiving T302 3000
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
!
interface BRI0/0/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
!
!
!
!
control-plane
!
!
voice-port 0/0/0
translation-profile incoming incomingcall
translation-profile outgoing outgoingcall
no vad
compand-type a-law
cptone DE
timeouts interdigit 5
bearer-cap Speech
!
voice-port 0/0/1
!
!
mgcp fax t38 ecm
!
!
dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
!
dial-peer voice 1100 voip
description zum Callmanager-PUB
preference 5
destination-pattern [1-9]T
session target ipv4:192.168.2.240
voice-class codec 10
voice-class h323 1
dtmf-relay h245-alphanumeric
fax-relay ecm disable
!
dial-peer voice 2000 pots
description *****Local Via BRI0/0/0*****
preference 5
destination-pattern 0T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
fax rate disable
direct-inward-dial
port 0/0/0
!
!
!
!
gatekeeper
shutdown
!
!
telephony-service
srst mode auto-provision all
srst ephone template 5
srst ephone description srst fallback auto-provision phone : Jul 07 2005 17:45:08 : Jun 05 2014 08:37:20
srst dn line-mode dual
max-ephones 5
max-dn 10
ip source-address 192.168.2.253 port 2000
max-redirect 20
system message "SRST Mode: Cisco Unified CME
keepalive 10
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Jun 05 2014 08:37:38
!
!
ephone-dn 1 dual-line
number 105
label 105
description +43732316262105
name +43732316262105
!
!
ephone-dn 2 dual-line
number 106
description 106
name 106
!
!
ephone-dn 3 dual-line
number 101
label 101
description +43732316262101
name +43732316262101
!
!
ephone 1
description srst fallback auto-provision phone : Jul 07 2005 17:45:08 : Jun 05 2014 08:37:20
mac-address 5897.1E29.955F
ephone-template 5
button 1:1 2:2
!
!
!
ephone 2
description srst fallback auto-provision phone : Jul 07 2005 17:45:08 : Jun 05 2014 08:37:20
mac-address A456.3040.3F2D
ephone-template 5
button 1:3
!
!
!
line con 0
password cisco
logging synchronous
line aux 0
line vty 0 4
privilege level 15
password cisco
transport input all
line vty 5 15
access-class 23 in
privilege level 15
password cisco
transport input telnet ssh
!
scheduler allocate 20000 1000
ntp master 3
end
Thanks in advance for your help, it is really appreciated (been battling with this for few days).
