08-05-2010 07:24 PM - edited 03-16-2019 12:07 AM
Hello Guys,
I really want to simulate a T-1 with 2 x 2600XM routers I have with VWICS in them and a crossover cable. What do I need to do to ge this done
08-05-2010 09:44 PM
Hi,
If you have another router with T1, cross connects both routers.
Regards,
Muhammad Amir Raza
08-06-2010 04:55 AM
Do you know where I can find a sample configs for setting these routers up to use ds0-groups and pri-groups? I have never done the configurations before.
08-06-2010 06:07 AM
Sample config FYI.
Router 1
controller e1 0/0/0
linecode hdb3
framing crc4
clock source internal
;Switching Side
pri-group timeslot 1-31
int s0/0/0:15
isdn incoming-voice voice
isdn protocol-emulate network
Router 2
dial-peer voice 1 pots
destination-pattern 9T
forward-digits all
port 0/0/0:15
controller e1 0/0/0
linecode hdb3
framing crc4
clock source line
;User Side
pri-group timeslot 1-31
int s0/0/0:15
isdn incoming-voice voice
isdn protocol-emulate user
Regards,
Muhammad Amir Raza
08-06-2010 05:10 AM
You also need an AIM-VOICE-30 to work with the VWIC cards.
You cannot do anything without it.
The alternative, is the NM voice hardware.
08-06-2010 06:18 AM
I am using a T-1 VWICS. Why do I need a AIM-VOICE-30? All my 24 channels come up when I enter the pri-group command. I already added my 24 PVDM's to both of my HDV module.
08-06-2010 06:22 AM
Because you have NM-HDV. The VWIC would work outside it in presence of AIM-VOICE-30.
.
08-06-2010 07:09 AM
Now that I have everything to make this work. What would my configuration look like to make this back to back setup work? The post the other guy gave me is for a E-1 setup not T-1. I will not be working with 30 channels and my control channel wil not be s0/0/0:15 but s0/0/0:23.
08-06-2010 07:22 AM
That is pretty much the only difference.
08-09-2010 04:37 AM
Hi,
I have posted sample E1 configuration for your understanding, I hope you can convert it to T1 configuration.
Regards,
Muhammad Amir Raza
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: