i have configured on a uc520 on-ramp and off-ramp and all is working fine, i send fax with e-mail and i receive fax with e-mail.
The problem is when i receive a fax from another telephone number(in the uc are present 4 lines) i cannot transfer the call to the extension of the fax dial-peer.
Suggestions?! When the uc was configured with t.38 for a stonefax application the only thing configured was two dial-peer, one for the pstn-to-stonfax and one for stonefax-to-pstn and all was working fine comprised the call transfer to the fax extension.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4