Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

T.37 Faxing with UC560

I have configured this and appear to be running into a Dial-Peer issue in that I am not matching on the outgoing dial peer. This is a lab configuration and here are the applicable Config entries.

fax receive called-subscriber $d$

fax interface-type fax-mail

mta send server 172.21.12.12 port 25

mta send subject FAX

mta send postmaster myemailaddress

mta send mail-from hostname sendingaddress

mta send mail-from username $s$

application

service onramp flash:/app_faxmail_onramp.2.0.1.3.tcl

!

service fax_detect flash:app_fax_detect.2.1.2.2.tcl

voice-port 0/1/1

dial-peer voice 233 pots

service onramp

incoming called-number 5551212

direct-inward-dial

port 0/1/1

!

dial-peer voice 232 mmoip

service fax_on_vfc_onramp_app out-bound

destination-pattern 5551212

information-type fax

session target mailto:myemailaddress

image encoding MH

image resolution fine

dsn failure

I am matching on the incoming - but I thought it should then send it to the next dial peer - but I get no match.

Dec 15 21:53:05.512: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

  Calling Number=, Called Number=, Voice-Interface=0x87D74004,

  Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

  Peer Info Type=DIALPEER_INFO_SPEECH

Dec 15 21:53:05.512: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

  Match Rule=DP_MATCH_PORT;

Dec 15 21:53:05.512: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

  Result=Success(0) after DP_MATCH_PORT; Incoming Dial-peer=233

Dec 15 21:53:05.512: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

  dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

Dec 15 21:53:05.512: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerSPI:exit@6475

Dec 15 21:53:05.516: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

  Calling Number=, Called Number=, Peer Info Type=DIALPEER_INFO_SPEECH

Dec 15 21:53:05.516: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)

Dec 15 21:53:05.516: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

  dialstring=, saf_enabled=0, saf_dndb_lookup=1, dp_result=-1

Dec 15 21:53:05.516: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

  Result=NO_MATCH(-1)

Any help is greatly appeciated.

Thanks,

Heath

Everyone's tags (6)
1 REPLY

T.37 Faxing with UC560

Already answered in other post.
Regards.

486
Views
0
Helpful
1
Replies
CreatePlease login to create content