We updated the IOS to c3845-spservicesk9-mz.124-15.T11 and it has tested fine. Strange since the T.37 featuer was introduced with c3845-spservicesk9-mz.124-24.T
We have the T.37 application on our 3845, we trying to get the OffRamp service functioning correctly, we are making some headway and can send data via a thrid party application internally, albeit with issues...
1. The external recipient fax is not able to pick up the fax call producing a connection error "Email send failed. Close SMTPConnection error. 554 5.3.0 an unknown error occurred" - Attached 'debug fax mta all' (cisco 3845) debugfromnav.txt
2. We can send a fax via the third party internally, but it only produces a blank tiff. We are sending using 200dpi, B&W with CCITT compression - Attached 'debug fax mta all' internaldebug.txt
3. If I try via Outlook we get the below NDR - Tried using tiff attachment that has been received by the onramp TCL app.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...