Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

t1 cas caller id mdmf format

Customer ordered a pstn circuit and ended up with a T1 CAS rather than PRI. So naturally the age old how does caller id work.

My understanding is that you need fgd ports to make this work, but I want to be sure of my ground. the carrier is saying they are delivering the number via mdmf format. Isn't that the old delimiter *ani*dnis* kind of thing?  My understanding is that ISR routers don't support this. Is that true?

thx again

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Gold

Re: t1 cas caller id mdmf format

Correct. Sometime CAS circuits require a little timing adjustments.

Hall of Fame Super Gold

Re: t1 cas caller id mdmf format

Contact at the address present in my profile, please.

8 REPLIES
Hall of Fame Super Gold

Re: t1 cas caller id mdmf format

Ask explicitely... Different people use different terms.

I have a script for *ani*dnis* plus name association. Some custoemr were happy with it until finally switched to PRI.

New Member

Re: t1 cas caller id mdmf format

Do you mean a TCL script?

Hall of Fame Super Gold

Re: t1 cas caller id mdmf format

New Member

Re: t1 cas caller id mdmf format

you are something. do you code the ds0-group and   e&m-wink-start  dtmf dnis?    Or is it done some other way

Bill

Hall of Fame Super Gold

Re: t1 cas caller id mdmf format

Correct. Sometime CAS circuits require a little timing adjustments.

New Member

Re: t1 cas caller id mdmf format

okay, out of curiousity what would this script cost?

Hall of Fame Super Gold

Re: t1 cas caller id mdmf format

Contact at the address present in my profile, please.

New Member

Re: t1 cas caller id mdmf format

thanks for all your help. Not sure how you let folks know except to click correct answer. I liked the old way better. If there is a rating system let em know. Thanks again

814
Views
0
Helpful
8
Replies