cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
798
Views
0
Helpful
5
Replies

Tandberg E20 with Other Cisco IP Telephone One way voice probmlem

KY_
Level 4
Level 4

Hello,

I have E20 Tandberg  version TE-4.1.1, register with sip it can send and receive outbound calls,

When i try local call 7911,7965,7945,9971 ip telephone  i can not hear voice,

Therefore,When i calls local ip phone one way voice problem, but outbound calls working normally

Thanks  a lot,

1 Accepted Solution

Accepted Solutions

acampbell
VIP Alumni
VIP Alumni

Hi,

Check that their is both way IP routing between the VLAN for the IP phones and the VLAN for the Tandberg.

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

View solution in original post

5 Replies 5

acampbell
VIP Alumni
VIP Alumni

Hi,

Check that their is both way IP routing between the VLAN for the IP phones and the VLAN for the Tandberg.

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Hello,

I checked it, E20 and other phone different vlan,

E20:192.168.166.0

other ip phone : 192.168.164.0 (voice vlan)

E20 does not register via voice vlan,

Hi,

Have you made sure that you can ping both ways beween these Ip subnets.

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Hi,

I cant not ping between both subnets, how can solve this issue,

Hi,

You will need to find out what does the layer 3 ip routing between the subnets.

Is it a router , layer3 switch or a firewall etc

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: