We are using CUCM7.0 with tcl script to play announcements, PSTN caller calls and dials CUCM extension to reach a IP phone user.
The problem is if the user dials another outside PSTN number while announcement is being played the outgoing dial-peers are matched and call is completed.
We haved aggregate the last line in this TCL script and the problem had resolved but now we have other problem, the outgoing calls are not working:
service autoatt flash:its-CISCO.188.8.131.52.tcl paramspace english language en param operator 696 paramspace english index 0 param menu-timeout 3 paramspace english prefix en param aa-pilot 6119696 param en flash: param max-extension-length 3
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...