Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

TCP/UDP ports for IP Communicator and SecureCRT

Hello,

Does anyone knows what are the TCP/UDP ports for IP Communicator and SecureCRT?

We need those to be configured into FW.

Many thanks in advance.

Regards,

Maddox

2 REPLIES
Hall of Fame Super Silver

Re: TCP/UDP ports for IP Communicator and SecureCRT

IPCommunicator when used as SCCP endpoint uses TCP 2000, and UDP 16384-32767 for RTP stream.

sCRT uses port based on protocol that you are attmpting to connect with, so for telnet it uses TCP 23, SSH will use port 22.

HTH,

Chris

New Member

Re: TCP/UDP ports for IP Communicator and SecureCRT

Chris,

Thank you for your help.

That latter UDP port is going to be the issue.

Is there a way to limit that down from 16k ports?

Many thanks in advance.

Regards,

Maddox

605
Views
0
Helpful
2
Replies
CreatePlease to create content