Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

TDD/TTY Deployment

Hello

I have recently deployed a CME/CUE solution for a Mental Heath Center. The now require a tdd/tty device. My reserch so far has taken me to this document: http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/txtrly.html#wp1026211. The setup is as follows Cisco 2851 (revision 53.51) running c2800nm-ipvoicek9-mz.124-24.T1.bin. I have an ATA hooked up for paging and I am hoping to use the other port for this tdd/tty device. I would like to know if this is going to work with the equipment I have? Any pointers would be great.

Thanks

Rad

5 REPLIES
Hall of Fame Super Gold

Re: TDD/TTY Deployment

Recommend use a VG202 for that.

ATA is not IOS, and is obsolte in a lot of applications.

New Member

Re: TDD/TTY Deployment

So what I have will not work?

Hall of Fame Super Gold

Re: TDD/TTY Deployment

The link you psoted, includes the supported platform for the features.

However I do not think you need text relay, so check again what they really need to do.

New Member

Re: TDD/TTY Deployment

What they would like to do is use a device like this http://www.dealsourcedirect.com/clarity-iiip.html?source=googleps , And make it work with CME using an ATA.

Hall of Fame Super Gold

Re: TDD/TTY Deployment

That should work. But best is FXS port in the router. No fax/modem/tty issue whatever, never.

404
Views
0
Helpful
5
Replies