Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

TelePresence

There is a confusion in setting a telepresence actually my BOQ includes

 

Telepresence EX-60 

Presence Sx20

Cisco Virtual VCS control

Cisco Virtual VCs express way

Management suite application with jabber license

Precision HD camera

Mcu 5310

UCS c-series server

help me creating a visio

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi, I would recommend to

Hi, 

I would recommend to check the TP design guide below: 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/design/guides/videodg/vidguide.pdf

It comes with a Video Architecture diagram which might help you build your own according to your customer's needs. 

Also you can just google telepresence video design images and you'll get some examples. 

Regards, 

 

Tere. 

Please rate helpful posts!

Regards, Tere. If you find this post helpful, please rate! :)
6 REPLIES

Not sure what the question is

Not sure what the question is but we wont be able to create a visio for you without knowing more details. I would suggest you contact a Cisco partner or if you have specific questions, feel free to post here.

Please rate useful posts.
New Member

can you help me how we will

can you help me how we will connect all these devices

what is the role of MCU specificaly

The MCU is used for combining

The MCU is used for combining (mixing) multiple audio and video streams for video conferencing.

New Member

so can i finalize the design

so can i finalize the design as 

 

SX-20 , EX-60 connected to  VCS control 

VCS control connected to CUCM, VCS express way

VCS expressway connected to internet cloud

TMS connected to CUCM,VCS control

so where will MCU will be connected ?

 

Hello 1-Cisco MCU , can be

Hello

 

1-If you have regustered video endpoints on CUCM .Cisco MCU , can be integrated with CUCM using SIP trunk.Then you Can configure Route pattern on CUCM to access MCU or AA conference  resources . TMS is used For management and schendule so you will register MCU and your VCS toTMS  .If you have multipoint on your network , which will regiister to VCS , so you have to integrate between MCU and VCS using H323 or SIP to control . For more information , kindly find the below:-

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Multiway_Deployment_Guide_X7.pdf

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco_TMS_Admin_Guide_14-1.pdf

4-Kindly find the below link which is very useful to get a brief about all solution.

http://www.zebrac.com/zebra/common/PreviewDocument.ashx?itemId=1053&refItemId=T470DOCUMENTS&refTableId=470&language=EN

 

Note: Your above devices will be inside your network , except your expressway will be on DMZ area .

 

Thanks

please rate all useful information

 

Cisco Employee

Hi, I would recommend to

Hi, 

I would recommend to check the TP design guide below: 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/design/guides/videodg/vidguide.pdf

It comes with a Video Architecture diagram which might help you build your own according to your customer's needs. 

Also you can just google telepresence video design images and you'll get some examples. 

Regards, 

 

Tere. 

Please rate helpful posts!

Regards, Tere. If you find this post helpful, please rate! :)
154
Views
0
Helpful
6
Replies
CreatePlease to create content