cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1442
Views
0
Helpful
1
Replies

Temporary failure (with trace detail)

Hi there,

Now I think I can't go any further by myself

I have this scenario:

[Siemens PBX]--ISDN BRI MGCP--[myRouter3845]--(WAN)--[CUCM 8.5]--MyIPPhone

When I place the call from MyIPPhone to the Siemens extension, it works... If the Siemens extension calls me, I pick up the call and talk for about 4s.. then the call is dropped. As far as I could see in the traces, the CUCM sends a disconnect message to the router. But I cannot see the reason for that.

Any help?

Thanks.

Andrei.

========================================================================================================

Disconnection Message

========================================================================================================

Outbound Q931 DISCONNECT message to 10.211.3.40 at timestamp 07/27/2012 13:27:38.615

DISCONNECT, pd = 8, callref = 0x81, Message Size = 8 bytes

Cause i = 0x80A9 - Temporary failure

Entire Message:

010:  08 01 81 45 08 02 80 A9

========================================================================================================

Now, the detailed messages

========================================================================================================

13:27:38.615 | |*^*^*

13:27:38.615 |Out Message -- BriDisconnectMsg -- Protocol= BriProtocol|*^*^*

13:27:38.615 |Ie - Q931CauseIe IEData= 08 02 80 A9 |*^*^*

13:27:38.615 |MMan_Id= 0. (iep=  0 dsl= 9001 sapi=  0 ces=  0 IpAddr=2803d30a IpPort=2427)|*^*^*

13:27:38.615 |IsdnMsgData2= 08 01 81 45 08 02 80 A9 |*^*^*

13:27:38.618 |MGCPBhHandler - Sending BhHdr: 0004 0000 0010 9001 0001 0008|1,100,173,59994.1^*^*

13:27:38.618 |cdrWrite PER RR, orig = 0, lrn = 0, current = 0|1,100,173,59994.1^*^*

13:27:38.618 |ConnectionManager - wait_AuDisconnectRequest(18733429,18733430),disconnectType(1), IFHandling(0,0)|1,100,173,59994.1^*^*

13:27:38.618 |EnvProcessCdr::wait_DbCdrReq|1,100,173,59994.1^*^*

13:27:38.618 |EnvProcessCdr::wait_DbCdrReq DETAILED Entries 461922, Inserts 218662,             ZeroCalls 243260, StartRecords 0, Default 0|1,100,173,59994.1^*^*

13:27:38.618 |EnvProcessCdr::formatCdrData|1,100,173,59994.1^*^*

13:27:38.618 |ConnectionManager - storeMediaInfo(18733429): EXISTING ENTRY DISCOVERED, size=83|1,100,173,59994.1^*^*

13:27:38.618 |ConnectionManager - storeMediaInfo(18733430): EXISTING ENTRY DISCOVERED, size=83|1,100,173,59994.1^*^*

13:27:38.618 |MediaCoordinator - wait_AuDisconnectRequest,CI(18733429,18733430),IFCreated(1,1)|1,100,173,59994.1^*^*

13:27:38.618 |MediaCoordinator - wait_AuDisconnectRequest - sending disconnect to MediaManager(218947)|1,100,173,59994.1^*^*

13:27:38.618 |MediaManager(218947)::wait_AuDisconnectRequest, mCleanupPreallocatedMTP=0|1,100,173,59994.1^*^*

13:27:38.618 |MediaManager(218947)::wait_AuDisconnectRequest, mrid(0,0) ci(1873342918733430) size(1), dt(1)|1,100,173,59994.1^*^*

13:27:38.618 |MediaManager(218947)::wait_AuDisconnectRequest, StopSession,disconn MX(130,223076) mrid (0 0), IFHandling(0,0)|1,100,173,59994.1^*^*

13:27:38.618 |MediaExchange(223076)::wait_Disconnect, dt=1,stReason=0,IFHandling(0,0)|1,100,173,59994.1^*^*

13:27:38.618 |MGCPInterface(90209) - isGClearCall - return false, gClearSupported:0, mpeerxfermode:13|1,100,173,59994.1^*^*

13:27:38.618 |DET-H245Interface-(59994)::handleStopStreaming, stopStreamingRecdInWaitForCapExchgState=0|1,100,173,59994.1^*^*

13:27:38.618 |MGCPHandler send msg SUCCESSFULLY to: 10.211.3.40

MDCX 491422 BRI/S0/SU1/P1/1@myRouter3845 MGCP 0.1

C: D0000000011dd975000000F580000001

I: 5A

X: 1

M: recvonly

R: D/[0-9ABCD*#]

Q: process,loop

|1,100,173,59994.1^*^*

========================================================================================================

1 Reply 1

Joseph Martini
Cisco Employee
Cisco Employee

Can you post some of the CCM trace prior to the disconnect being sent out please?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: